Creating Parcels from AutoCAD Objects in Civil 3D 2021

In this exercise, you will convert AutoCAD entities to land parcels with automatic labels that show useful topological data, such as land area.

Parcel layout tools are available to create and edit parcels with precision. You will learn more about the Parcel Layout tools in later Autodesk Civil 3D tutorial exercises.

Create parcels from existing AutoCAD objects

1. Open drawing Parcel-1A.dwg, which is located in the tutorials drawings folder.This drawing contains an existing ground surface, alignments that represent intersecting road centerlines, and AutoCAD lines and arcs that represent property boundaries. In the following steps, you will create Autodesk Civil 3D parcel objects from the existing lines and arcs.
2. Click Home tab >> Create Design >> panel Parcel drop-down >> Create Parcel From Object Find.
3. Select the lines and the polyline border at the east side of the site, north of the First Street alignment. Press Enter.

Note:
On the command line, notice that a variety of AutoCAD objects can be used to create parcels.

1. In the Create Parcels – From Objects dialog box, specify the following parameters:
   • Site: Site 1
   • Parcel Style: Single-Family
   • Area Label Style: Parcel Number And Area
     Note:
     Parcels must have area labels, but segment labels are optional.
   • Automatically Add Segment Labels: Selected
   • Erase Existing Entities: Selected
2. Click OK.The parcels are created and labeled. The labels annotate the overall parcel area, as well as the bearing and distance of each line and curve segment. These labels are automatically updated if any line or curve segments are edited or deleted.The numbers with a circular border are automatically generated parcel numbers. You will change these numbers to use a more desirable numbering convention.

Change the parcel numbering

1. Click a parcel number to select it. Click Parcel tab Modify panel Renumber/Rename Find.
2. In the Renumber/Rename Parcels dialog box, specify the following parameters:
   • Renumber: Selected
   • Starting Number: 101
   • Increment Value: 1
3. Click OK.
4. To specify a start point, click to top-most parcel.
5. To specify an end point, click the bottom-most parcel.

1. Press Enter twice.The parcel area labels are now numbered in ascending order, with three digits.

Except where otherwise noted, this work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License. Please see the Autodesk Creative Commons FAQ for more information.